1 min read
Does your application require a bearing with a reinforced design? It depends on just how rigorous the application is. In some cases, a standard bearing will do just fine, but in applications where extreme speeds, loads and conditions are probable,...
Read More
1 min read
Heavy-duty applications call for superior bearing strength, but how is bearing strength actually measured? In essence, bearing strength is the...
1 min read
The US manufacturing economy continues to waver between marked improvement and ongoing challenge in 2016, according to the National Association of...
2 min read
Have you ever fabricated plastic components? For many traditional machine shops, metal is an easy and familiar material to work with, but plastic...
1 min read
I had a great conversation with a machinist who wanted to compare Rulon 142 and Turcite B; two common materials used for slide and linear bearings....
1 min read
How does brinelling cause bearing failure in metal? Some of our best questions come directly into our Ask the Experts portal, and this one is a prime...
1 min read
Why should I choose parylene coating for my devices? This question was asked at a recent site visit, and I thought I’d share some quick facts about...
1 min read
Why should you choose Fluoroloy H over other PTFE blends? We’ve got the facts! Fluoroloy H (also known as Rulon H) is one over 300 unique Rulon...
1 min read
Metal bearings – what causes bearing failure, really? The short answer is that there is no short answer; bearings can fail from a multitude of...
1 min read
Takeoffs and landings, friction and fatigue, these are just a few of the demands on aerospace bearings. Should designers choose Rulon J tape or...
1 min read
Today we are talking films on Tech Talk ― as in corona treatment of ― not the latest “must- see” summer blockbuster (although we enjoy those, too!)....
1 min read
P, V and PV – how do they impact a plane bearing system? Let’s take a quick review of this important connection. Plane bearings are basically rolling...
1 min read
I’ve just returned from a few days of customer site visits, which is always a great experience. I enjoy touring the manufacturing plants and learning...
