1 min read
Have you downloaded your free copy of the Bearing Selection Design White Paper? If so, you’re probably familiar with ASTM Testing Standards for plastic materials. Today we’ll provide a review of why these standards are an important consideration in...
Read More
1 min read
Why should I choose parylene coating for my devices? This question was asked at a recent site visit, and I thought I’d share some quick facts about...
1 min read
Why should you choose Fluoroloy H over other PTFE blends? We’ve got the facts! Fluoroloy H (also known as Rulon H) is one over 300 unique Rulon...
1 min read
Metal bearings – what causes bearing failure, really? The short answer is that there is no short answer; bearings can fail from a multitude of...
1 min read
Takeoffs and landings, friction and fatigue, these are just a few of the demands on aerospace bearings. Should designers choose Rulon J tape or...
1 min read
Today we are talking films on Tech Talk ― as in corona treatment of ― not the latest “must- see” summer blockbuster (although we enjoy those, too!)....
1 min read
P, V and PV – how do they impact a plane bearing system? Let’s take a quick review of this important connection. Plane bearings are basically rolling...
1 min read
I’ve just returned from a few days of customer site visits, which is always a great experience. I enjoy touring the manufacturing plants and learning...
1 min read
When should you choose bearings vs. bushings? I’m often asked about bearing nomenclature (see our blog entry on plane bearings vs. plain bearings)....
1 min read
Thank you for your overwhelming response to our recent technical paper, Machining Plastics the Essential Guide to Tools and Techniques! We’ve heard...
1 min read
Keep sending us your questions about bearing failure and other bearing challenges! Some of our best products were developed as a result of your...
1 min read
We had an interesting call on our Ask the Experts line this week concerning underwater bearings and the benefits of wood vs. plastic in a hydro plant...
1 min read
Plastic fabrication is completely unlike metal fabrication; a fact that we covered indepth in our recent Machining Plastics technical white paper....
