1 min read
I’ve been getting a lot of questions recently about PTFE-based materials like Rulon for use in water applications. Generally, PTFE is not a good solution for water-lubricated applications. Today I want to share the results of some independent...
Read More
1 min read
In honor of this recent commencement season, today we’re sharing a lesson right from our bearing resource center, TriStar University. Here’s a...
1 min read
Does your application require a bearing with a reinforced design? It depends on just how rigorous the application is. In some cases, a standard...
1 min read
Heavy-duty applications call for superior bearing strength, but how is bearing strength actually measured? In essence, bearing strength is the...
1 min read
Have you posted your design question to our Ask the Experts portal? It may be featured in our weekly blog, which is where this post comes from! A...
1 min read
The US manufacturing economy continues to waver between marked improvement and ongoing challenge in 2016, according to the National Association of...
1 min read
The first step to understanding the Coefficient of Friction (COF) of engineering plastics when compared to that of steel is grasping that the COF is...
1 min read
We had a great call with a marine designer who wanted to review options for marine bearings. Like many engineers, she was reluctant to replace...
2 min read
Have you ever fabricated plastic components? For many traditional machine shops, metal is an easy and familiar material to work with, but plastic...
1 min read
I had a great conversation with a machinist who wanted to compare Rulon 142 and Turcite B; two common materials used for slide and linear bearings....
1 min read
How does brinelling cause bearing failure in metal? Some of our best questions come directly into our Ask the Experts portal, and this one is a prime...
1 min read
Have you downloaded your free copy of the Bearing Selection Design White Paper? If so, you’re probably familiar with ASTM Testing Standards for...
1 min read
Why should I choose parylene coating for my devices? This question was asked at a recent site visit, and I thought I’d share some quick facts about...
