Tech Talk Blog

A recent development at TriStar – Surface Modification Division is a liquid surface treatment to induce a hydrophobic property. Most foam materials are very hydroscopic and absorbent. When our hydrophobic liquid surface treatment is applied to most foam materials, the foam becomes extremely hydrophobic. Below is an image of our treatment on medical grade polyurethane foam.

Though our tests indicate this treatment does not work well on natural materials like wood and cotton, but this treatment performs great on synthetic fibers and fabrics.

If you would like more information on this product, please continue to our website at www.tstar.com.

Recent headlines tell us that everything from our kitchen cutting boards, Tupperware and soda fountain delivery tubing are infected with everything from fecal matter to salmonella. There are solutions available thanks to new polymer technology using antimicrobial additives and surface treatments. Many polymers are now available with silver ions which help to effectively inhibit the potential growth of bacteria, yeast and fungi on the polymer surface. By using unique zeolite carriers with silver ions, a counter force to the sodium ions present in moisture  interrupt respiration, reproduction and metabolism of destructive microbes. TriStar offers several polymer solutions now in molding and extrusion resins to dramatically reduce the potential of microbial growth in your products. Browse through our Video Learning Center for even more information.

If you have been machining metal for a while the change to plastics can be a little daunting. There are some tricks to the trade and some basic things you need to know about thermal expansion, speeds and feeds and the use of coolant.  The biggest thing to remember is that most plastics, especially those that are thermoplastic, will melt when they get hot enough. Thermosets won’t melt but can be brittle to machine so they are a totally different problem. Since heat is the culprit you must machine each plastic with the knowledge that it will grow, sometimes very rapidly, and then shrink again after machining. Some materials have to be machined once, normalize at room temperature, and then go back for final cuts. Sharp tooling, properly designed tools, speeds and feeds are all critical so there will be a learning curve. TriStar offers a “Machining Plastics” seminar and design manual through their website. For even more tips, Ask The Experts – that’s what they are there for! It’s not rocket science but there are tricks to the trade!